TECHNICAL SPECIFICATIONS
- Standards: IEEE 802.3u 100Base-FX/TX, 802.3
10Base-T
- Connectors: RJ-45 (auto MDI/MDI-X)
&
1310nm Multi-Mode Duplex-SC - dBm [ Min TX, Max TX,
Sensitivity, Power Budget ]:
[ -19dBm, -14dBm, -30dBm, 11dB ]
- Data Transfer Rate:
100Mbps for FX
10 or 100Mbps
(auto-negotiation) for TP
10 or 100Mbps (forced) for TP selectable by
DIP-Switch (S1-Bit1 & S1-Bit2) - Duplex Mode:
Full
or Half (forced) for FX selectable by DIP-Switch (S1-Bit5)
Full or Half
(auto-sense) for TP
Full or Half (forced) for TP selectable by DIP-Switch
(S1-Bit3) - MAC Address Table: 2K
- Buffer
Memory: 384K
- Cables / Max Distance:
Category 5 or above UTP, up to 100m
50/125, 62.5/125, 100/140µm
Multi-Mode fiber, up to 2km
- LEDs:
Unit —
POWER
FX Port — FX LNK/ACT, FX FDX/COL
TX Port — TX
LNK/ACT, TX 100 - Power Requirement: 1A@+5V DC
- Operating Temperature: 0° to 50° C
- Humidity: 5% to 90%
- Dimension: 26.2 x 70.3 x 94mm (H x w x D)
- Safety: FCC Class A, CE Mark Approval, RoHS
Compliance
ADDITIONAL
FEATURES
- Link Fault Pass-Through
(LFP)
LFP function only takes effect as S1-Bit4 is enabled.
Disabled S1-Bit4 will turn this media converter into a general one. The
LFP function works only when two converters at each end own this
capability. Furthermore, both LFP converters should be supplied only by
the SAME manufacturer. The connection coming from LFP converter with odd
models or non-LFP converter will cease the LFP function. - USB
Self-Powered
With the optional USB cable (sold separately), power
can be drawn directly from your desktop or notebook computer's USB port without
using an external power adapter. |
![[ Search ]](ImgMN/Search.gif)
![[ Products ]](ImgMN/Browse.gif)
![[ Browse by Connector ]](ImgMN/Browse-by-connector.gif)
