This
eight-port active hub is a low profile connecting device for ARCNET™
network. The NAA10804 is for network using twisted pair wire. With the
ability of conditioning, boosting, and relaying network signals, this hub is
used to attain maximum allowable connection distance and to offer flexibility
in the physical connection scheme.
The NAA10804 has eight ports
for the connection to other ARCNET™ network components, such as network
adapters, active hubs, passive hubs, and repeaters. Nine LEDs in the front
panel indicate the power and eight ports' working status, thus providing a
significant aid for network diagnostic. The power LED lights when power is ON.
A port LED is on either data is being transmitted over the network or the token
is being passed from node to node. LED is OFF when the port detects no signals.
No signal is detected by the port when the cable is not connected, the cable is
broken, or ARCNET™ adapter is not installed on the workstation. LED blinks
when the network is under reconfiguration, i.e. a workstation joins or exits
the network.
DEVICE DRIVERS
SUPPORTED
Filename: n/a
Included Drivers:n/a | | TECHNICAL
SPECIFICATIONS | - Model:
NAA10804
- PC
Supported: n/a
- Standards: ARCNET™
- Network
Connector:
| | NAA10804 | 8 RJ-11 UTP
jacks |
| - LAN Controller:
n/a
- Data Transfer
Rate: 2.5Mbps
- Duplex: n/a
- Cable:
| | NAA10804 | Twisted pair wire, max. distance up to 400ft, L0525 |
|
- LEDs: Power LED
for hub and one activity LED for each port/jack
- Power Requirement: 110V/220V AC (Dip
Switch Selectable)
- Ambient Temperature: 0° ~ 50°
C
- Humidity: 5%
~ 90%
- Dimensions: 69 x 269 x 137 mm (H x W x
D)
Weight:
1.5kgs - EMI
Rating: FCC Part 15 Class A and CE
Mark
|
![[ Search ]](ImgMN/Search.gif)
![[ Products ]](ImgMN/Browse.gif)
![[ Browse by Connector ]](ImgMN/Browse-by-connector.gif)
