![[ Search ]](ImgMN/Search.gif) ![[ Products ]](ImgMN/Browse.gif) ![[ Browse by Connector ]](ImgMN/Browse-by-connector.gif) |
Part
Number: M2403
Product Description: USB Type A to
Type A Jumper Cable 6 feet (USB 2.0 Compliant)
Category: Cables
w/USBA, USB & FireWire, and USB & Firewire
|  |
|
Please
Note:This cable doesn't work for connecting two computers together. If you need
to connect two computers, please check out our ADP3181
LinQ Fileshare Cable.
USB Notes:- USB peripherals can
connect either to a computer's port or to a hub.
- If the computer doesn't
have enough ports for all the peripherals, a hub is necessary.
- Maximum
length on individual cables is 5 Meters.
- No terminators are needed on this
bus.
- The A (flat) type port would be considered the "out" port on a computer
or hub.
- The B (square) type port would be considered an "in" port on hubs or
peripherals.
- A typical USB "out" (Type-A) port can provide up to
500mA.
- The speed is 12 Megabytes per second for USB 1.1 or 480 Megabytes per
second for USB 2.0, the maximum number of peripherals to a controller is 63
(hubs needed when the computer runs out of ports).
|
| Categories and Products Related to: USB Type A
to Type A Jumper Cable 6 feet (USB 2.0 Compliant) | |
|
| E-mail
product page to a friend |
All contents
Copyright © 1996-2010. All Rights
Reserved. |
