![[ Search ]](ImgMN/Search.gif) ![[ Products ]](ImgMN/Browse.gif) ![[ Browse by Connector ]](ImgMN/Browse-by-connector.gif) |
Part
Number: M2403-15
Product Description: USB Type A to
Type A Jumper Cable 15 feet (USB 2.0 Compliant)
Category: Cables
w/USBA, USB & FireWire, and USB & Firewire
|  |
|
Please
Note:This cable doesn't work for connecting two computers together. If you need
to connect two computers, please check out our ADP3181
LinQ Fileshare Cable or ADP3182 in combination
with M2404-15.
USB Notes:- USB
peripherals can connect either to a computer's port or to a hub.
- If the
computer doesn't have enough ports for all the peripherals, a hub is
necessary.
- Maximum length on individual cables is 5 Meters.
- No
terminators are needed on this bus.
- The A (flat) type port would be
considered the "out" port on a computer or hub.
- The B (square) type port
would be considered an "in" port on hubs or peripherals.
- A typical USB "out"
(Type-A) port can provide up to 500mA.
- The speed is 12 Megabytes per second
for USB 1.1 or 480 Megabytes per second for USB 2.0, the maximum number of
peripherals to a controller is 63 (hubs needed when the computer runs out of
ports).
|
| Categories and Products Related
to: USB Type A to Type A Jumper Cable 15 feet (USB 2.0
Compliant) | |
|
| E-mail
product page to a friend |
All contents
Copyright © 1996-2010. All Rights
Reserved. |
