The ADP6011 is the industry's first consumer-oriented
parallel port capable of logical addressing beyond LPT 1/2/3. With the ability
to support a full selection of IRQs, the ADP6011 has the configurability that
made Lava famous.
We also carry these other parallel cards:
| ADP6010 | Single Port
High Speed Parallel ISA | | ADP6011 | Single Port
IEEE-1284 Parallel ISA | | ADP6012 | Single Port IEEE-1284 Parallel
PCI | | ADP6013 | Dual Port
IEEE-1284 Parallel PCI |
General Specifications: ADP6011- Single 25-pin
Enhanced (ECP/EPP) Parallel Port. Maximum transfer rate: 2.5 M bytes/sec
- Supports both Enhanced Capabilities Port (ECP) and Enhanced Parallel Port
(EPP) standards
- ECP modes supported:
no-interrupt/interrupt/DMA/DMA+interrupt
- Fully IEEE-1284 compliant; tested
with "MS-ECP Compliance Test"
- Fully backward compatible with standard 4-bit
and 8-bit (bi-directional) parallel ports
- Configurable as LPT 1 through LPT
6, using IRQ 2/3/4/5/7/10/11/12, DMA 1/3/none
- Lava Lifetime Warranty
Technical Specifications:
ADP6011
- Overall length: 163 mm
- Depth at back: 14
mm (towards rear of computer); Unseated depth: 23 mm
- Depth at front: 64 mm
(towards interior of computer) Unseated depth: 73 mm
- Mass: 60 g
- Jumper
selectable to addresses 03BC, 0378, 0278, 0238, 0288, 0388 (hex)
- Frequency:
24.000 MHz
- Signal degradation: 3.65 mm
- Operation temperatures: 0°-70°C
- Maximum humidity: 90% at STP
- Input impedance: 15 ohms
- Infant
Mortality: 0.137% (average for all Lava products)
- CSA compliant, FCC
compliant, CE marked
|
![[ Search ]](ImgMN/Search.gif)
![[ Products ]](ImgMN/Browse.gif)
![[ Browse by Connector ]](ImgMN/Browse-by-connector.gif)
