![[ Search ]](ImgMN/Search.gif) ![[ Products ]](ImgMN/Browse.gif) ![[ Browse by Connector ]](ImgMN/Browse-by-connector.gif) |
Part
Number: ADP5126
Product Description: Adapt any
standard VGA monitor to accept a Composite Sync (for SUN
Workstations)
Category: Cables w/DH15, Other,
Video, and Monitor
|  |
|
This adapter
is designed to split the Composite sync so that a workstation that only has the
composite sync signal (no H/V signal) can be connected to a VGA monitor that
only supports the H/V signal.
Some older SUN and MAC workstations have the
composite sync and don't provide the H/V signal. This adapter was designed to
allow a VGA monitor work with those workstations.
This adapter would not be
necessary for newer SUN and MAC workstations that provide the H/V
signals.- For newer MAC workstations, use M5247
or M5250 instead.
- For newer SUN workstations, use
M5297 instead.
For the older workstations,
since this adapter has the DH15 input, a second adapter would be needed to go
with this one.- The M5250 could be used for the
MAC workstation.
- A special adapter would need to be ordered for the SUN
workstation.
Sync Input: | | Composite | Input pin 13
Range: 30 to 150KHz
TTL
Levels | Sync Outputs: |
Vertical | Output pin 14
Range: As input
TTL
Levels | | Composite | Output pin 13
H
and V combined
TTL Levels | Connectors: | Input |
DH15 Male | | Output | DH15
Female | Power:No external
power Required | Direct | Input pin 9 (If
available)
Requires DDC-2 compliant card
+5.0VDC | | Indirect | Power derived from sync signal inputs |
Physical: | Size | 2.05"L x 1.38"W x 0.88"H | | Weight |
33gm/1.2oz | |
| Categories and Products Related to: Adapt any
standard VGA monitor to accept a Composite Sync (for SUN
Workstations) | |
|
| E-mail
product page to a friend |
All contents
Copyright © 1996-2009. All Rights
Reserved. |
