Features- 40 times faster than the original USB
- Supports up to
480 Mbps data transfer throughput
- Supports: Windows™ 98SE, 2000, ME,
XP, OS 8.6 to 9.2 (USB 1.1 support only), OS X.0.3 or greater (USB 2.0
support)
- 2 External Type A USB ports
- Hassle free, easy software setup and
configuration. No jumper or ID setting.
- Hi-Speed USB 2.0 bus allows the
sharing of the storage peripheral among many PCs through optional high speed
USB 2.0 hub devices
- Easy to configure Hi-Speed bus for HDD storage,
connectivity and more
Requirements:- PC
- Windows™
98SE, 2000, ME, XP
- 300 MHz or greater
- Available PCI
slot
- MAC™
- Mac™ G3 required
- OS 8.6 to 9.2 (USB 1.1
support only)
- OS X.0.3 or greater (USB 2.0 support only)
- Available PCI
slot
USB Notes:- USB peripherals can connect either to a
computer's port or to a hub.
- If the computer doesn't have enough ports for
all the peripherals, a hub is necessary.
- Maximum length on individual cables
is 5 Meters.
- No terminators are needed on this bus.
- The A (flat) type
port would be considered the "out" port on a computer or hub.
- The B (square)
type port would be considered an "in" port on hubs or peripherals.
- A typical
USB "out" (Type-A) port can provide up to 500mA.
- The speed is 12 Megabytes
per second, the maximum number of peripherals to a controller is 63 (hubs
needed when the computer runs out of ports).
|
![[ Search ]](ImgMN/Search.gif)
![[ Products ]](ImgMN/Browse.gif)
![[ Browse by Connector ]](ImgMN/Browse-by-connector.gif)
