Features:- Fully compliant with USB 2.0 and 1.1
- Interface:
44-pin ATA/ATAPI to USB
- Data Transfer Rate: USB 1.1 OHCI 1.5Mbps, 12Mbps;
USB 2.0 EHCI 480Mbps
- Length: USB Cable 1.5m; Power Cable 1m
- One dual
color LED (Active: orange/Power On: green)
- Fully Ultra ATA/ATAPI
compatible
- Supports maximum IDE/ATA data transfer rate of
100MB/sec
- Compliant to ATA/ATAPI-5 specifications and PCI 2.1
- Compliant
with Ultra ATA/33, ATA/66, ATA/100, IDE & ATAPI devices
- Powered from USB
port. Please Note: Some USB ports, specifically on notebook or laptop
computers, may not provide enough current for this. If working current is
insufficient, it offsets from external power through DC Jack (requires 5VDC,
Center=positive).
- Supports Windows™ 98/98SE/ME/2000/XP and MAC™ OS
9.x or 10
 The
physical dimensions of the drive needs to be at or less than the dimensions
shown above in order for the drive to fit in the enclosure. Maximum thickness
is .375 inches or 3/8 inches.
USB Notes:- USB peripherals
can connect either to a computer's port or to a hub.
- If the computer doesn't
have enough ports for all the peripherals, a hub is necessary.
- Maximum
length on individual cables is 5 Meters.
- No terminators are needed on this
bus.
- The A (flat) type port would be considered the "out" port on a computer
or hub.
- The B (square) type port would be considered an "in" port on hubs or
peripherals.
- A typical USB "out" (Type-A) port can provide up to
500mA.
- The speed is 12 Megabytes per second for USB 1.1 or 480 Megabytes per
second for USB 2.0, the maximum number of peripherals to a controller is 63
(hubs needed when the computer runs out of ports).
|
![[ Search ]](ImgMN/Search.gif)
![[ Products ]](ImgMN/Browse.gif)
![[ Browse by Connector ]](ImgMN/Browse-by-connector.gif)
