![[ Search ]](ImgMN/Search.gif) ![[ Products ]](ImgMN/Browse.gif) ![[ Browse by Connector ]](ImgMN/Browse-by-connector.gif) |
Part
Number: ADP3142-100
Product Description: USB to
Ethernet™ 10/100BaseT Adapter
Category: Electronic items
w/MP08, Electronic items w/USBA, USB & FireWire, USB, 10Base T, 100Base TX, USB
& Modules for Hubs, and Converters
|  |
|
Features- Compliant with USB 2.0 and USB 1.1
specifications
- Compliant with IEEE 802.3 (10Base-T) and 802.3u (100Base-TX)
standards
- Supports both full-duplex and half-duplex operations.
- Supports
suspend mode and remote wakeup via link-up and magic packet.
- Powered by USB
port, no external power adapter required.
- Equips with diagnostic
LEDs
- Plug & Play installation
System Requirements- IBM
compatible pentium-233MHz or faster PC or Mac
- 64 MB RAM or more
- One
available USB port
- Windows 2000, XP, Vista 32/64-bit; Mac OS x
10.x
Please note: This adapter is designed to connect a computer or
laptop to an Ethernet network, for connecting a Printer to an Ethernet network,
please see our NEX4121.
USB
Notes:- USB peripherals can connect either to a computer's port or to
a hub.
- If the computer doesn't have enough ports for all the peripherals, a
hub is necessary.
- Maximum length on individual cables is 5 Meters.
- No
terminators are needed on this bus.
- The A (flat) type port would be
considered the "out" port on a computer or hub.
- The B (square) type port
would be considered an "in" port on hubs or peripherals.
- A typical USB "out"
(Type-A) port can provide up to 500mA.
- The speed is 12 Megabytes per second
for USB 1.1 or 480 Megabytes per second for USB 2.0, the maximum number of
peripherals to a controller is 63 (hubs needed when the computer runs out of
ports).
|
| Categories and Products Related
to: USB to Ethernet™ 10/100BaseT
Adapter | |
|
| E-mail
product page to a friend |
All contents
Copyright © 1996-2010. All Rights
Reserved. |
